BED LINEN STYLES
			CASES:	Cases are made with 7" cuffs topstitched to the bodies. The Bodies are sewn with French seams.
	Basic Sheet	Sheet with turn-back cuff
			SHEETS:	Basic sheets are made with 7" cuffs topstitched to the bodies.
				Sheets can be made with a "turn-back" cuff extending approx. 18" on each side of the sheet, attached to the top cuff with a mitered corner seam.
	Sham Fronts	Sham Backs
			SHAMS:	KNIFE-EDGE shams are made with no flanges. They are closed with a zipper very close to the bottom of the back of the sham.
				CLASSIC shams are made with 2" flanges on all four sides. They are closed with a zipper very close to the bottom of the back of the sham.
				CUFFED SHAMS have cuffs on each edge of the pillow that continue to the back of the sham. They are closed with a zipper at the bottom edge of the sham.
				MITERED SHAMS have a 7" band and a 2" flange at the four edges of the sham. The bands are joined with mitered corners. The shams are closed with a zipper at the bottom back of the sham.
	Duvet Fronts	Duvet Backs
			DUVET COVERS:	KNIFE-EDGE duvet covers are made without flanges. A zipper opening is located across width of the duvet, near the bottom edge.
				CLASSIC duvet covers are made with 3" flanges. A zipper opening is located across the width of the duvet, near the bottom edge.
				TAILOR-MADE duvet covers are made with a band of embroidery that forms a "U" shape on the surface of the bed. A zipper opening is located across the width of the duvet, near the bottom edge.
				MITERED duvets include a band and a 2" flange around the sides and botttom of the duvet. The bands are joined at the corners with mitered seams. A sopper opening is located across the width of the duvet, near the bottom edge.
			COVERLETS:	Matelasse coverlsts are made with 2" blind hems on all four sides.
			BED SKIRTS:	TAILORED bed skirt panels are straignt with a pleat in the center of each side and end panel. There are three panels in each set.
				RUFFLED bed skirt panels are ruffled the full length of each side and end panel. There are three panels in each set.