TAILOR MADE BATH LINENS

Standard Bedding Sizes		Length x Width (inches)
Pillow Cases Finished sizes	Standard	21″ x 33″
Pillow Cases Finished sizes	Queen	21″ x 37″
	King	21″ x 43″
Flat Sheets Finished sizes	Twin	111″ x 75″
Flat Sheets Finished sizes	Queen	116″ x 96″
	King	116″ x 112″
	Super Queen	120″ x 108″
	Super King	122″ x 124″
Fitted Sheets To fit mattress sizes Standard 16" pocket Other pockets made to order	Twin	75″ x 39″
	Queen	80″ x 60″
	King	80″ x 76″
	Cal. King	84″ x 72″
Pillow Shams Inside measurements	Neck Roll	6″ x 16″
Pillow Shams Inside measurements	Boudoir	12″ x 16″
	Standard	20″ x 26″
	Queen	20″ x 30″
	King	20″ x 42″
	European	26″ x 26″
	Back Pillow	30″ x 30″
	Bolster	8″ x 24″
Duvet Covers Inside measurements	Twin	88″ x 68″
Duvet Covers Inside measurements	Queen	94″ x 88″
	King	94″ x 104″
	Super Queen	98″ x 98″
	Super King	98″ x 114″
Coverlets Finsished sizes	Twin	93″ x 75″
Coverlets Finsished sizes	Queen	98″ x 96″
	>King	98″ x 112″
	Super Queen	104″ x 108″
	Super King	104″ x 124″
Bed Skirt Panels To fit mattress sizes Standard 16″ drop Other drops made to order	Twin	75″ x 39″
	Queen	80″ x 60″
	King	80″ x 76″
	Super Queen	84″ x 72″

Bed Linen Styles
		Cases:	Cases are made with 7" cuffs topstitched to the bodies. The Bodies are sewn with French seams.
Basic Sheet	Sheet with turn-back cuff
		Sheets:	Basic sheets are made with 7" cuffs topstitched to the bodies.
			Sheets can be made with a "turn-back" cuff extending approx. 18" on each side of the sheet, attached to the top cuff with a mitered corner seam.

Sham Fronts	Sham Backs
		Shams:	Knife-edge shams are made with no flanges. They are closed with a zipper very close to the bottom of the back of the sham.
			Classic shams are made with 2" flanges on all four sides. They are closed with a zipper very close to the bottom of the back of the sham.
			Cuffed Shams have cuffs on each edge of the pillow that continue to the back of the sham. They are closed with a zipper at the bottom edge of the sham.
			Mitered Shams have a 7" band and a 2" flange at the four edges of the sham. The bands are joined with mitered corners. The shams are closed with a zipper at the bottom back of the sham.
Duvet Fronts	Duvet Backs
		Duvet Covers:	Knife-Edge duvet covers are made without flanges. A zipper opening is located across width of the duvet, near the bottom edge.
			Classic duvet covers are made with 3" flanges. A zipper opening is located across the width of the duvet, near the bottom edge.
			Tailor-made duvet covers are made with a band of embroidery that forms a "U" shape on the surface of the bed. A zipper opening is located across the width of the duvet, near the bottom edge.
			Mitered duvets include a band and a 2" flange around the sides and botttom of the duvet. The bands are joined at the corners with mitered seams. A sopper opening is located across the width of the duvet, near the bottom edge.
		Coverlets:	Matelasse coverlsts are made with 2" blind hems on all four sides.
		Bed Skirts:	Tailored bed skirt panels are straignt with a pleat in the center of each side and end panel. There are three panels in each set.
			Ruffled bed skirt panels are ruffled the full length of each side and end panel. There are three panels in each set.

	Thread Types
	Palm	Pistachio	Rose	Chocolate	Pewter	Gold	Natural White
Avenue
Fret
Reflection Stripe
Chain
Heritage
Wave
Chippendale
Key
Florentine
Lucern

(Wave Embroidery with Palm Thread)

Anali's Tailor Made terry towels coordinated in seven colorways. This collection is a favorite of interior designers who want to make their own combinations of patterns and color to enhance the other decorator elements in a room.

View matching bed linens

Thread Types